Fire near Aléria

What the satellites measured

This fire was tracked from 31 August at 12:08 to 31 August at 15:23, through 14 satellite detections. The detected extent reaches 138 ha.

Detected extent

138 ha

Cumulative power

350 MW

Peak power

49 MW

Detections

14

“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a 375 m pixel counts in full even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal satellite detection and are not an official assessment: only the local fire and civil protection authorities are authoritative.

Timeline

Contained40 hastarted on 31 August at 14:09 · contained on 31 August at 19:54

1. Reported contained31 August at 19:54

   Incendie à Aleria : le feu est fixé, entre 30 et 40 hectares parcourus — France Bleu

2. Area revised to 40 ha31 August at 15:51

   Un feu se déclare à Aleria, entre 30 et 40 hectares de végétation détruits — France 3 Corse

3. Area revised to 30 ha31 August at 14:09

   Aleria : un incendie se déclare au lieu-dit Mavela, plus de 30 hectares déjà parcourus — Corse Net Infos

4. First report31 August at 14:09

   Aleria : un incendie se déclare au lieu-dit Mavela, 20 hectares déjà parcourus — Corse Net Infos

A "contained" fire is no longer spreading but is not out: crews remain on site and it can flare up again. Statuses and areas come from press reports and official sources, matched automatically; they are not an official record — only the prefecture and the fire service are authoritative. An entry with no news for ten days is closed automatically, and each entry's history keeps track of who announced what, and when.

Replay how the fire spread

The map is framed on this fire and loads only its detections. The timeline below covers the whole known life of the fire — from the first trace, satellite or report, to the last announcement from emergency services — and the ticks on the bar mark those announcements. Detections often stop before containment: a fire stops radiating once it stops spreading, which is exactly when it is declared contained. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “12 h” stacks twelve hours , as the home map does, where stacking avoids an empty screen between two satellite passes. Both are true, but they say different things.

How the radiative power evolved

One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 30 days; beyond that, clustering would merge two successive fires in the same place.

Satellite passes in detail

Follow live

The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of the Canadair, Dash 8 and Air Tractor aircraft of the French Sécurité civile.