Fire near Великомихайлівська сільська громада (UA)

47.96°N, 36.47°E · first detected on 29 July at 12:19

What the satellites measured

This fire was tracked from 29 July at 12:19 to 11 August at 13:17, that is 13 days, through 60 satellite detections. The detected extent reaches 1,915 ha.

Detected extent
1,915 ha
Cumulative power
708 MW
Peak power, one pixel
69 MW
VIIRS and MODIS detections
60

These four figures cover the polar orbits alone, the ones that measure an area. The pass table below also counts geostationary detections, more frequent but too coarse for geometry, and its power column sums a whole pass where the peak above is that of a single pixel.

“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a 375 m pixel counts in full even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal detection and are not an official assessment: only the emergency services and the competent authorities are authoritative.

Replay how the fire spread

The map is framed on this fire and loads only its detections. The timeline below covers the whole known life of the fire, from the first trace, satellite or report, to the last announcement from emergency services, and the ticks on the bar mark those announcements. Detections often stop before containment: a fire stops radiating once it stops spreading, which is exactly when it is declared contained. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “12 h” stacks twelve hours , as the home map does, where stacking avoids an empty screen between two satellite passes. Both are true, but they say different things.

The detected extent

Outline of the burned area near Великомихайлівська сільська громада (UA), drawn over satellite imagery
The outline is the union of the ground footprints of every satellite detection of this fire, from the first pass to the last. The background is the EOX cloudless Sentinel-2 mosaic, 2024 vintage: it shows the landscape BEFORE these fires, not the burn scar.

The spread, pass after pass

  1. Великомихайлівська сільська громада (UA) seen by Sentinel-2 on 21 July

    21 July

    before the fire

  2. Великомихайлівська сільська громада (UA) seen by Sentinel-2 on 31 July

    31 July

    during

  3. Великомихайлівська сільська громада (UA) seen by Sentinel-2 on 5 August

    5 August

    during

One image per usable Sentinel-2 pass, on the same framing throughout so that the comparison means something. The satellite comes back every two to five days and clouds rule out some of the passes: the gaps in the series are days without an image, not days without fire.

How the radiative power evolved

One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 16 days; beyond that, clustering would merge two successive fires in the same place.

Fire dynamics

Loading history…

Satellite passes in detail

PassPower summed over the passDetectionsSensor
11 August at 13:174 MW1N
11 August at 12:4195 MW3N21
9 August at 12:324 MW1N20
7 August at 14:1923 MW1Aqua
7 August at 12:49167 MW5N
7 August at 12:1330 MW5N21
7 August at 01:440 MW1N20
7 August at 00:481 MW1N21
6 August at 13:2813 MW4N20
6 August at 13:1027 MW3N
6 August at 12:3433 MW6N21
6 August at 11:4730 MW5N20
6 August at 11:3010 MW2N
6 August at 01:070 MW1N21
5 August at 12:0910 MW2N20
3 August at 11:494 MW1N21
1 August at 13:4783 MW2Aqua
1 August at 13:218 MW1N20
30 July at 12:006 MW1N
30 July at 11:2633 MW2N21
29 July at 12:193 MW1N

Follow live

The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of water bombers tracked by ADS-B, anywhere in the world.

Open the fire map

GISFirePro

Get the alert instead of looking for it

GISFire Pro watches the zones you draw, anywhere in the world, and warns you by email, SMS or webhook from the first satellite detection: fire in the zone, fire closing in, smoke announced before it arrives, lightning nearby. A GeoJSON and CSV API, exports and history come with it.

From €8.25 a month, 14-day trial, no commitment. The public map stays free.

Discover GISFire Pro

© 2026 SARO · Gistin. All rights reserved. The interface, its presentation and the contents of GISFire are protected; reproducing or imitating them requires written permission. The source data remain the property of their respective producers, see the credits.

Legal notice · Privacy policy · GISFire v2.1.0