Fire near Heilongjiang (CN)

46.33°N, 127.84°E · first detected on 22 October at 06:44

What the satellites measured

This fire was tracked from 22 October at 06:44 to 3 November at 06:16, that is 12 days, through 826 satellite detections. The detected extent reaches 14,605 ha.

Detected extent
14,605 ha
Cumulative power
5,937 MW
Peak power, one pixel
91 MW
VIIRS and MODIS detections
826
Estimated emissions
1.1 kt of carbon
Carbon burnt in the 0.1 degree cells (about 10 km) around the fire, from 22 October 2026 to 3 November 2026. An order-of-magnitude estimate from GFAS (ECMWF, Copernicus CAMS): it also counts neighbouring fires in the same cell. Contains modified Copernicus Atmosphere Monitoring Service information (2026).

These four figures cover the polar orbits alone, the ones that measure an area. The pass table below also counts geostationary detections, more frequent but too coarse for geometry, and its power column sums a whole pass where the peak above is that of a single pixel.

“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a pixel counts in full (375 m for VIIRS, 1 km for MODIS) even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal detection and are not an official assessment: only the emergency services and the competent authorities are authoritative.

Replay how the fire spread

The map is framed on this fire's footprint and loads only its detections. The timeline below covers the period in which satellites saw it, from the first to the last detection, with twelve hours before and twenty-four after; the ticks on the bar mark the emergency services' announcements that fall within it. The cursor opens on the most powerful pass, and playback replays the whole fire in about thirty seconds. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “24 h” stacks twenty-four hours : a fire stays visible between two satellite passes, which come two to four times a day. Both are true, but they say different things.

Before, after: the burn scar seen from space

Sentinel-2 satellite image of the same area near Heilongjiang (CN) during the fire, on 31 October 2026
Sentinel-2 satellite image of the area near Heilongjiang (CN) before the fire, on 16 October 2026
Before · 16 October 2026During · 31 October 2026

Sentinel-2, 10 m resolution. No sufficiently clear pass has followed the fire going out yet: the second image was taken DURING the fire, so the burn scar had not finished spreading. It will be replaced automatically at the first clear sky. Contains modified Copernicus Sentinel-2 data (2026).

How the radiative power evolved

One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 15 days; beyond that, clustering would merge two successive fires in the same place.

Fire dynamics

Loading history…

Satellite passes in detail

PassPower summed over the passDetectionsSensor
3 November at 06:1612 MW3N20
3 November at 05:2110 MW2N21
2 November at 07:4425 MW2Aqua
2 November at 06:3510 MW2N20
2 November at 06:16146 MW19N
2 November at 05:38185 MW24N21
2 November at 04:5334 MW7N20
1 November at 06:3396 MW15N
1 November at 05:5534 MW6N21
1 November at 05:1420 MW6N20
31 October at 08:0931 MW1Aqua
31 October at 06:1646 MW6N21
31 October at 05:32131 MW29N20
31 October at 05:1273 MW14N
31 October at 04:3695 MW9N21
30 October at 19:263 MW1N
30 October at 18:492 MW1N21
30 October at 18:052 MW2N20
30 October at 07:29269 MW12Aqua
30 October at 06:3337 MW4N21
30 October at 05:5177 MW10N20
29 October at 06:1049 MW6N20
29 October at 05:49197 MW24N
29 October at 05:13197 MW38N21
29 October at 04:30116 MW26N20
29 October at 04:1023 MW3N
28 October at 18:241 MW1N
28 October at 17:453 MW2N21
27 October at 06:27113 MW15N
27 October at 05:49121 MW16N21
27 October at 05:07176 MW27N20
27 October at 04:49108 MW12N
27 October at 04:1086 MW6N21
26 October at 06:46106 MW9N
26 October at 06:10178 MW20N21
26 October at 05:25145 MW32N20
26 October at 05:06124 MW21N
26 October at 04:28123 MW15N21
25 October at 19:412 MW2N20
25 October at 19:193 MW2N
25 October at 18:431 MW2N21
25 October at 07:37280 MW18Aqua
25 October at 06:27159 MW11N21
25 October at 05:44349 MW47N20
25 October at 05:23187 MW40N
25 October at 04:47237 MW28N21
25 October at 04:0452 MW8N20
24 October at 07:59241 MW4Aqua
24 October at 07:04333 MW43N20
24 October at 06:44308 MW53N
24 October at 06:06256 MW50N21
24 October at 05:2269 MW16N20
23 October at 18:392 MW1N21
23 October at 07:2319 MW6N20
23 October at 07:015 MW1N
23 October at 06:25106 MW19N21
23 October at 05:4254 MW11N20
23 October at 05:2121 MW5N
22 October at 07:237 MW2N
22 October at 06:442 MW1N21

8 other fires near Heilongjiang (CN)

Separate fires, apart in time or in space, not pieces of this one. A single municipality can have several over one summer, and a forest massif often covers more than a hundred square kilometres.

Follow live

The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of water bombers tracked by ADS-B, anywhere in the world.

Open the fire map

Take the data of this fire with you

A ready-to-use archive, paid once, no subscription. It contains:

From €20.00 excl. VAT, six formats to choose from, link valid for 30 days.

Download the data

Pro subscribers: included. €49 excl. VAT a month, no commitment. The public map stays free. Discover GISFire Pro

© 2026 SARO · Gistin. All rights reserved. The interface, its presentation and the contents of GISFire are protected; reproducing or imitating them requires written permission. The source data remain the property of their respective producers, see the credits.

Legal notice · Privacy policy ·  · GISFire v2.4.2