Fire near Luapula (ZM)

9.64°S, 28.96°E · first detected on 8 October at 13:15

What the satellites measured

This fire was tracked from 8 October at 13:15 to 29 October at 12:40, that is 21 days, through 328 satellite detections. The detected extent reaches 9,050 ha.

Detected extent
9,050 ha
Cumulative power
2,639 MW
Peak power, one pixel
45 MW
VIIRS and MODIS detections
328
Estimated emissions
5.1 kt of carbon
Carbon burnt in the 0.1 degree cells (about 10 km) around the fire, from 8 October 2026 to 29 October 2026. An order-of-magnitude estimate from GFAS (ECMWF, Copernicus CAMS): it also counts neighbouring fires in the same cell. Contains modified Copernicus Atmosphere Monitoring Service information (2026).

These four figures cover the polar orbits alone, the ones that measure an area. The pass table below also counts geostationary detections, more frequent but too coarse for geometry, and its power column sums a whole pass where the peak above is that of a single pixel.

“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a pixel counts in full (375 m for VIIRS, 1 km for MODIS) even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal detection and are not an official assessment: only the emergency services and the competent authorities are authoritative.

Replay how the fire spread

The map is framed on this fire's footprint and loads only its detections. The timeline below covers the period in which satellites saw it, from the first to the last detection, with twelve hours before and twenty-four after; the ticks on the bar mark the emergency services' announcements that fall within it. The cursor opens on the most powerful pass, and playback replays the whole fire in about thirty seconds. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “24 h” stacks twenty-four hours : a fire stays visible between two satellite passes, which come two to four times a day. Both are true, but they say different things.

Before, after: the burn scar seen from space

Sentinel-2 satellite image of the same area near Luapula (ZM) after the fire, on 7 November 2026
Sentinel-2 satellite image of the area near Luapula (ZM) before the fire, on 20 September 2026
Before · 20 September 2026After · 7 November 2026

Sentinel-2, 10 m resolution. The dates are those of the least cloudy passes available: “after” is not the day after the fire went out, it is the first clear sky that followed. Contains modified Copernicus Sentinel-2 data (2026).

How the radiative power evolved

One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 24 days; beyond that, clustering would merge two successive fires in the same place.

Fire dynamics

Loading history…

Satellite passes in detail

PassPower summed over the passDetectionsSensor
29 October at 12:402 MW1N20
29 October at 12:193 MW1N
28 October at 12:5717 MW2N20
28 October at 12:4048 MW2N
26 October at 11:564 MW1N20
25 October at 12:5712 MW3N21
24 October at 15:577 MW1Aqua
24 October at 14:196 MW1N21
24 October at 13:3414 MW4N20
24 October at 08:2013 MW2Terra
23 October at 13:345 MW1N
22 October at 13:515 MW1N
22 October at 13:154 MW2N21
22 October at 08:425 MW1Terra
21 October at 13:3491 MW7N21
19 October at 16:033 MW1Aqua
19 October at 13:2819 MW2N20
19 October at 13:0827 MW3N
17 October at 14:0559 MW7N20
17 October at 13:4724 MW7N
17 October at 13:08231 MW10N21
17 October at 08:4219 MW2Terra
17 October at 01:315 MW2N20
17 October at 01:096 MW2N
16 October at 14:049 MW1N
16 October at 01:481 MW1N20
16 October at 01:291 MW2N
16 October at 00:524 MW2N21
15 October at 14:2258 MW11N
15 October at 13:4794 MW15N21
15 October at 13:0267 MW12N20
14 October at 16:1025 MW2Aqua
14 October at 14:4212 MW1N
14 October at 14:0445 MW4N21
14 October at 13:2185 MW15N20
14 October at 13:0283 MW6N
14 October at 08:2548 MW5Terra
13 October at 15:3148 MW3Aqua
13 October at 14:2346 MW4N21
13 October at 13:4045 MW10N20
12 October at 13:0210 MW1N21
11 October at 15:5512 MW1Aqua
11 October at 13:5756 MW4N
11 October at 13:2134 MW4N21
10 October at 14:3673 MW4N20
10 October at 14:17122 MW9N
10 October at 13:40129 MW10N21
10 October at 12:56119 MW8N20
9 October at 13:5719 MW3N21
9 October at 13:1390 MW5N20
8 October at 14:1924 MW2N21
8 October at 13:152 MW1N
7 October at 13:5126 MW4N20
7 October at 13:3279 MW5N
7 October at 12:56111 MW8N21
7 October at 08:4481 MW7Terra
6 October at 14:1266 MW2N20
6 October at 13:51170 MW4N

8 other fires near Luapula (ZM)

Separate fires, apart in time or in space, not pieces of this one. A single municipality can have several over one summer, and a forest massif often covers more than a hundred square kilometres.

Follow live

The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of water bombers tracked by ADS-B, anywhere in the world.

Open the fire map

Take the data of this fire with you

A ready-to-use archive, paid once, no subscription. It contains:

From €20.00 excl. VAT, six formats to choose from, link valid for 30 days.

Download the data

Pro subscribers: included. €49 excl. VAT a month, no commitment. The public map stays free. Discover GISFire Pro

© 2026 SARO · Gistin. All rights reserved. The interface, its presentation and the contents of GISFire are protected; reproducing or imitating them requires written permission. The source data remain the property of their respective producers, see the credits.

Legal notice · Privacy policy ·  · GISFire v2.4.2