Fire near Neufchâtel-Hardelot

What the satellites measured

This fire was tracked from 12 August at 14:04 to 13 August at 04:51, through 28 satellite detections. The detected extent reaches 272 ha.

Detected extent

272 ha

Cumulative power

250 MW

Peak power

30 MW

Detections

28

“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a 375 m pixel counts in full even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal satellite detection and are not an official assessment: only the local fire and civil protection authorities are authoritative.

Timeline

Extinguished180 hastarted on 12 August at 18:21 · contained on 17 August at 19:23 · extinguished on 22 August at 12:00

1. Presumed over22 August at 12:00

   No further news — a day of silence for an active fire, four for a contained one — and no recent satellite detection nearby: the register closed the entry on its own. This is a presumption, not an announcement, and a new report would reopen it.

2. Reported contained17 August at 19:23

   Les feux de forêt entre Neufchâtel-Hardelot et Dannes sont désormais maîtrisés, le préfet annonce des pistes de réflexions pour éviter de… — France 3 Régions

3. Area revised to 180 ha13 August at 00:21

   Incendies entre Dannes et Neufchâtel-Hardelot, 180 hectares de détruits — Delta FM

4. First report12 August at 18:21

   Feu de forêt entre Neufchâtel-Hardelot et Dannes : 1200 personnes évacuées et 23 hectares déjà partis en fumée — France 3 Régions

A "contained" fire is no longer spreading but is not out: crews remain on site and it can flare up again. Statuses and areas come from press reports and official sources, matched automatically; they are not an official record — only the prefecture and the fire service are authoritative. An entry with no news for ten days is closed automatically, and each entry's history keeps track of who announced what, and when.

Replay how the fire spread

The map is framed on this fire and loads only its detections. The timeline below covers the whole known life of the fire — from the first trace, satellite or report, to the last announcement from emergency services — and the ticks on the bar mark those announcements. Detections often stop before containment: a fire stops radiating once it stops spreading, which is exactly when it is declared contained. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “12 h” stacks twelve hours , as the home map does, where stacking avoids an empty screen between two satellite passes. Both are true, but they say different things.

The detected extent

How the radiative power evolved

One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 30 days; beyond that, clustering would merge two successive fires in the same place.

Satellite passes in detail

Follow live

The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of the Canadair, Dash 8 and Air Tractor aircraft of the French Sécurité civile.