Fire near Salamat (TD)

10.76°N, 20.11°E · first detected on 15 October at 14:29

What the satellites measured

This fire was tracked from 15 October at 14:29 to 22 October at 16:25, that is 7 days, through 83 satellite detections. The detected extent reaches 1,190 ha.

Detected extent
1,190 ha
Cumulative power
856 MW
Peak power, one pixel
40 MW
VIIRS and MODIS detections
83
Estimated emissions
1.8 kt of carbon
Carbon burnt in the 0.1 degree cells (about 10 km) around the fire, from 15 October 2026 to 21 October 2026. An order-of-magnitude estimate from GFAS (ECMWF, Copernicus CAMS): it also counts neighbouring fires in the same cell. Contains modified Copernicus Atmosphere Monitoring Service information (2026). Published data stop on 21 October 2026.

These four figures cover the polar orbits alone, the ones that measure an area. The pass table below also counts geostationary detections, more frequent but too coarse for geometry, and its power column sums a whole pass where the peak above is that of a single pixel.

“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a pixel counts in full (375 m for VIIRS, 1 km for MODIS) even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal detection and are not an official assessment: only the emergency services and the competent authorities are authoritative.

Replay how the fire spread

The map is framed on this fire's footprint and loads only its detections. The timeline below covers the period in which satellites saw it, from the first to the last detection, with twelve hours before and twenty-four after; the ticks on the bar mark the emergency services' announcements that fall within it. The cursor opens on the most powerful pass, and playback replays the whole fire in about thirty seconds. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “24 h” stacks twenty-four hours : a fire stays visible between two satellite passes, which come two to four times a day. Both are true, but they say different things.

How the radiative power evolved

One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 10 days; beyond that, clustering would merge two successive fires in the same place.

Fire dynamics

Loading history…

Satellite passes in detail

PassPower summed over the passDetectionsSensor
22 October at 16:2517 MW2Aqua
22 October at 14:5512 MW1Met12
22 October at 14:3511 MW1Met12
22 October at 14:1938 MW5N20
22 October at 13:5726 MW3N
22 October at 12:4513 MW1Met12
21 October at 16:2511 MW1Met12
21 October at 15:1528 MW2Met12
21 October at 15:0742 MW1Met9
21 October at 14:1713 MW2N
21 October at 13:4040 MW3N21
20 October at 20:0512 MW1Met12
20 October at 19:5510 MW1Met12
20 October at 19:3517 MW1Met12
20 October at 19:2512 MW1Met12
20 October at 19:0527 MW2Met12
20 October at 18:5544 MW3Met12
20 October at 18:4551 MW2Met12
20 October at 18:3530 MW1Met12
20 October at 18:2563 MW3Met12
20 October at 18:1564 MW3Met12
20 October at 18:0567 MW3Met12
20 October at 17:5562 MW2Met12
20 October at 17:45179 MW5Met12
20 October at 17:35128 MW3Met12
20 October at 17:25143 MW4Met12
20 October at 17:15114 MW4Met12
20 October at 17:0594 MW4Met12
20 October at 16:55110 MW4Met12
20 October at 16:45102 MW3Met12
20 October at 16:3599 MW3Met12
20 October at 16:25393 MW9Met12
20 October at 16:15122 MW5Met12
20 October at 16:08351 MW4Met9
20 October at 16:05360 MW8Met12
20 October at 15:55492 MW7Met12
20 October at 15:52677 MW5Met9
20 October at 15:45413 MW7Met12
20 October at 15:37438 MW4Met9
20 October at 15:35288 MW5Met12
20 October at 15:25177 MW4Met12
20 October at 15:22631 MW4Met9
20 October at 15:15224 MW6Met12
20 October at 15:07170 MW3Met9
20 October at 15:0576 MW2Met12
20 October at 14:55148 MW9N20
20 October at 14:55107 MW3Met12
20 October at 14:52180 MW3Met9
20 October at 14:45194 MW4Met12
20 October at 14:37229 MW4Met9
20 October at 14:36155 MW10N
20 October at 14:35111 MW3Met12
20 October at 14:25105 MW3Met12
20 October at 14:2252 MW1Met9
20 October at 14:1565 MW2Met12
20 October at 14:0569 MW2Met12
20 October at 13:57109 MW9N21
20 October at 13:5541 MW1Met12
20 October at 13:5242 MW1Met9
20 October at 13:4568 MW2Met12
20 October at 13:3530 MW1Met12
20 October at 13:2589 MW3Met12
20 October at 13:2245 MW1Met9
20 October at 13:1574 MW7N20
20 October at 13:1561 MW2Met12
20 October at 13:0528 MW1Met12
20 October at 12:4542 MW2Met12
20 October at 12:3528 MW1Met12
19 October at 16:1050 MW4Aqua
19 October at 14:538 MW2N
19 October at 14:1939 MW5N21
19 October at 13:3425 MW2N20
16 October at 14:2938 MW6N20
16 October at 14:1033 MW8N
16 October at 13:3428 MW4N21
15 October at 14:2915 MW2N

8 other fires near Salamat (TD)

Separate fires, apart in time or in space, not pieces of this one. A single municipality can have several over one summer, and a forest massif often covers more than a hundred square kilometres.

Follow live

The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of water bombers tracked by ADS-B, anywhere in the world.

Open the fire map

Take the data of this fire with you

A ready-to-use archive, paid once, no subscription. It contains:

From €20.00 excl. VAT, six formats to choose from, link valid for 30 days.

Download the data

Pro subscribers: included. €49 excl. VAT a month, no commitment. The public map stays free. Discover GISFire Pro

© 2026 SARO · Gistin. All rights reserved. The interface, its presentation and the contents of GISFire are protected; reproducing or imitating them requires written permission. The source data remain the property of their respective producers, see the credits.

Legal notice · Privacy policy ·  · GISFire v2.4.2