Fire near Antananarivo (MG)

18.44°S, 46.86°E · first detected on 6 September at 11:23

What the satellites measured

This fire was tracked from 6 September at 11:23 to 6 September at 13:30, through 25 satellite detections. The detected extent reaches 515 ha.

Detected extent
515 ha
Cumulative power
366 MW
Peak power, one pixel
36 MW
VIIRS and MODIS detections
25

These four figures cover the polar orbits alone, the ones that measure an area. The pass table below also counts geostationary detections, more frequent but too coarse for geometry, and its power column sums a whole pass where the peak above is that of a single pixel.

“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a 375 m pixel counts in full even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal detection and are not an official assessment: only the emergency services and the competent authorities are authoritative.

Replay how the fire spread

The map is framed on this fire and loads only its detections. The timeline below covers the whole known life of the fire, from the first trace, satellite or report, to the last announcement from emergency services, and the ticks on the bar mark those announcements. Detections often stop before containment: a fire stops radiating once it stops spreading, which is exactly when it is declared contained. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “12 h” stacks twelve hours , as the home map does, where stacking avoids an empty screen between two satellite passes. Both are true, but they say different things.

How the radiative power evolved

One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 3 days; beyond that, clustering would merge two successive fires in the same place.

Fire dynamics

Loading history…

Satellite passes in detail

PassPower summed over the passDetectionsSensor
6 September at 23:0416 MW1Met9
6 September at 21:1212 MW1Met12
6 September at 14:3474 MW3Met9
6 September at 14:23135 MW4Met12
6 September at 14:1360 MW2Met12
6 September at 13:5333 MW1Met12
6 September at 13:4329 MW1Met12
6 September at 13:34239 MW3Met9
6 September at 13:33185 MW3Met12
6 September at 13:30199 MW12N20
6 September at 13:2318 MW1Met12
6 September at 12:53118 MW2Met12
6 September at 12:48364 MW4Met9
6 September at 12:4339 MW1Met12
6 September at 12:3446 MW3N21
6 September at 11:49121 MW10N20
6 September at 11:4897 MW1Met9
6 September at 11:4399 MW3Met12
6 September at 11:23130 MW3Met12

Follow live

The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of water bombers tracked by ADS-B, anywhere in the world.

Open the fire map

Get the alert instead of looking for it

GISFire Pro watches the zones you draw, anywhere in the world, and warns you by email, SMS or webhook from the first satellite detection: fire in the zone, fire closing in, smoke announced before it arrives, lightning nearby. A GeoJSON and CSV API, exports and history come with it.

From €8.25 a month, 14-day trial, no commitment. The public map stays free.

Discover GISFire Pro

© 2026 SARO · Gistin. All rights reserved. The interface, its presentation and the contents of GISFire are protected; reproducing or imitating them requires written permission. The source data remain the property of their respective producers, see the credits.

Legal notice · Privacy policy