Fire near Bandundu (CD)

3.32°S, 18.83°E · first detected on 6 September at 11:54

What the satellites measured

This fire was tracked from 6 September at 11:54 to 6 September at 14:55, through 76 satellite detections. The detected extent reaches 1,313 ha.

Detected extent
1,313 ha
Cumulative power
626 MW
Peak power, one pixel
35 MW
VIIRS and MODIS detections
76

These four figures cover the polar orbits alone, the ones that measure an area. The pass table below also counts geostationary detections, more frequent but too coarse for geometry, and its power column sums a whole pass where the peak above is that of a single pixel.

“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a 375 m pixel counts in full even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal detection and are not an official assessment: only the emergency services and the competent authorities are authoritative.

Replay how the fire spread

The map is framed on this fire and loads only its detections. The timeline below covers the whole known life of the fire, from the first trace, satellite or report, to the last announcement from emergency services, and the ticks on the bar mark those announcements. Detections often stop before containment: a fire stops radiating once it stops spreading, which is exactly when it is declared contained. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “12 h” stacks twelve hours , as the home map does, where stacking avoids an empty screen between two satellite passes. Both are true, but they say different things.

How the radiative power evolved

One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 3 days; beyond that, clustering would merge two successive fires in the same place.

Fire dynamics

Loading history…

Satellite passes in detail

PassPower summed over the passDetectionsSensor
6 September at 16:1422 MW2Met12
6 September at 16:0413 MW1Met12
6 September at 15:3413 MW1Met12
6 September at 15:1423 MW1Met12
6 September at 15:04103 MW4Met12
6 September at 14:55150 MW26N
6 September at 14:4422 MW2Met12
6 September at 14:3459 MW5Met12
6 September at 14:24149 MW8Met12
6 September at 14:19319 MW31N21
6 September at 14:14119 MW6Met12
6 September at 14:04122 MW7Met12
6 September at 13:5484 MW6Met12
6 September at 13:44113 MW6Met12
6 September at 13:3416 MW1Met12
6 September at 13:34110 MW16N20
6 September at 13:2456 MW3Met12
6 September at 13:14125 MW4Met12
6 September at 13:0478 MW5Met12
6 September at 12:54107 MW5Met12
6 September at 12:4425 MW2Met12
6 September at 12:3412 MW1Met12
6 September at 12:2412 MW1Met12
6 September at 12:1427 MW1Met12
6 September at 12:0436 MW2Met12
6 September at 11:5414 MW1Met12

Follow live

The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of water bombers tracked by ADS-B, anywhere in the world.

Open the fire map

Get the alert instead of looking for it

GISFire Pro watches the zones you draw, anywhere in the world, and warns you by email, SMS or webhook from the first satellite detection: fire in the zone, fire closing in, smoke announced before it arrives, lightning nearby. A GeoJSON and CSV API, exports and history come with it.

From €8.25 a month, 14-day trial, no commitment. The public map stays free.

Discover GISFire Pro

© 2026 SARO · Gistin. All rights reserved. The interface, its presentation and the contents of GISFire are protected; reproducing or imitating them requires written permission. The source data remain the property of their respective producers, see the credits.

Legal notice · Privacy policy