Fire near Hassi R'Mel (DZ)

32.94°N, 3.23°E · first detected on 8 August at 02:52

What the satellites measured

This fire was tracked from 8 August at 02:52 to 13 August at 15:21, that is 6 days, through 165 satellite detections. The detected extent reaches 812 ha.

Detected extent
812 ha
Cumulative power
1,112 MW
Peak power, one pixel
33 MW
VIIRS and MODIS detections
165

These four figures cover the polar orbits alone, the ones that measure an area. The pass table below also counts geostationary detections, more frequent but too coarse for geometry, and its power column sums a whole pass where the peak above is that of a single pixel.

“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a 375 m pixel counts in full even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal detection and are not an official assessment: only the emergency services and the competent authorities are authoritative.

Replay how the fire spread

The map is framed on this fire and loads only its detections. The timeline below covers the whole known life of the fire, from the first trace, satellite or report, to the last announcement from emergency services, and the ticks on the bar mark those announcements. Detections often stop before containment: a fire stops radiating once it stops spreading, which is exactly when it is declared contained. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “12 h” stacks twelve hours , as the home map does, where stacking avoids an empty screen between two satellite passes. Both are true, but they say different things.

How the radiative power evolved

One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 8 days; beyond that, clustering would merge two successive fires in the same place.

Fire dynamics

Loading history…

Satellite passes in detail

PassPower summed over the passDetectionsSensor
13 August at 15:2115 MW1N21
13 August at 14:171 MW1N
13 August at 04:0225 MW9N21
13 August at 03:1535 MW10N20
13 August at 02:5877 MW14N
12 August at 03:3739 MW3N20
11 August at 04:4142 MW7N21
11 August at 03:5442 MW8N20
11 August at 03:3764 MW4N
9 August at 15:5033 MW4N20
9 August at 15:3148 MW3N
9 August at 14:552 MW1N21
9 August at 14:107 MW2N20
9 August at 04:3220 MW14N20
9 August at 04:119 MW6N
9 August at 03:3910 MW6N21
9 August at 02:5220 MW17N20
8 August at 15:5024 MW2N
8 August at 15:144 MW1N21
8 August at 14:273 MW1N20
8 August at 14:104 MW1N
8 August at 04:3227 MW11N
8 August at 03:56156 MW12N21
8 August at 03:09157 MW11N20
8 August at 02:52247 MW16N
7 August at 13:5117 MW2N21
7 August at 04:497 MW2N
7 August at 03:308 MW6N20
6 August at 15:537 MW1N21

Follow live

The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of water bombers tracked by ADS-B, anywhere in the world.

Open the fire map

Get the alert instead of looking for it

GISFire Pro watches the zones you draw, anywhere in the world, and warns you by email, SMS or webhook from the first satellite detection: fire in the zone, fire closing in, smoke announced before it arrives, lightning nearby. A GeoJSON and CSV API, exports and history come with it.

From €8.25 a month, 14-day trial, no commitment. The public map stays free.

Discover GISFire Pro

© 2026 SARO · Gistin. All rights reserved. The interface, its presentation and the contents of GISFire are protected; reproducing or imitating them requires written permission. The source data remain the property of their respective producers, see the credits.

Legal notice · Privacy policy