Fire near Nouvelle-Galles du Sud (AU)
29.82°S, 152.82°E · first detected on 6 September at 00:08
What the satellites measured
This fire was tracked from 6 September at 00:08 to 6 September at 17:58, through 111 satellite detections. The detected extent reaches 969 ha.
- Detected extent
- 969 ha
- Cumulative power
- 1,464 MW
- Peak power, one pixel
- 60 MW
- VIIRS and MODIS detections
- 111
These four figures cover the polar orbits alone, the ones that measure an area. The pass table below also counts geostationary detections, more frequent but too coarse for geometry, and its power column sums a whole pass where the peak above is that of a single pixel.
“Detected extent” is not “burned area”: it is the union of the ground footprints of the satellite pixels, and a 375 m pixel counts in full even when only a forest edge is burning. Compared with press figures it is in practice one and a half to three times the area reported. Detections taken at the edge of the scan swath, too coarse to measure anything at all, are excluded. These figures come from thermal detection and are not an official assessment: only the emergency services and the competent authorities are authoritative.
Replay how the fire spread
The map is framed on this fire and loads only its detections. The timeline below covers the whole known life of the fire, from the first trace, satellite or report, to the last announcement from emergency services, and the ticks on the bar mark those announcements. Detections often stop before containment: a fire stops radiating once it stops spreading, which is exactly when it is declared contained. “1 h” shows what is burning within an hour of the chosen moment : the map then follows the power curve below and empties when it falls. “12 h” stacks twelve hours , as the home map does, where stacking avoids an empty screen between two satellite passes. Both are true, but they say different things.
How the radiative power evolved
One point per satellite pass: the sum of the fire radiative power measured over the fire. This is the curve that says whether the fire eased off or picked up again, which no cumulative figure shows. The window covers 3 days; beyond that, clustering would merge two successive fires in the same place.
Fire dynamics
Loading history…
Satellite passes in detail
| Pass | Power summed over the pass | Detections | Sensor |
|---|---|---|---|
| 6 September at 17:58 | 5 MW | 4 | N20 |
| 6 September at 17:37 | 10 MW | 7 | N |
| 6 September at 17:01 | 32 MW | 14 | N21 |
| 6 September at 16:16 | 24 MW | 14 | N20 |
| 6 September at 14:38 | 27 MW | 1 | Him9 |
| 6 September at 14:28 | 27 MW | 1 | Him9 |
| 6 September at 13:58 | 33 MW | 1 | Him9 |
| 6 September at 13:48 | 101 MW | 2 | Him9 |
| 6 September at 13:38 | 136 MW | 2 | Him9 |
| 6 September at 13:28 | 133 MW | 2 | Him9 |
| 6 September at 13:18 | 151 MW | 2 | Him9 |
| 6 September at 13:08 | 191 MW | 3 | Him9 |
| 6 September at 12:58 | 133 MW | 2 | Him9 |
| 6 September at 12:48 | 43 MW | 1 | Him9 |
| 6 September at 12:38 | 79 MW | 2 | Him9 |
| 6 September at 12:28 | 94 MW | 2 | Him9 |
| 6 September at 12:18 | 110 MW | 2 | Him9 |
| 6 September at 12:11 | 132 MW | 3 | Terra |
| 6 September at 12:08 | 142 MW | 2 | Him9 |
| 6 September at 11:58 | 246 MW | 2 | Him9 |
| 6 September at 11:48 | 230 MW | 3 | Him9 |
| 6 September at 11:38 | 294 MW | 2 | Him9 |
| 6 September at 11:28 | 635 MW | 5 | Him9 |
| 6 September at 11:18 | 592 MW | 3 | Him9 |
| 6 September at 11:08 | 438 MW | 2 | Him9 |
| 6 September at 10:58 | 306 MW | 2 | Him9 |
| 6 September at 10:48 | 172 MW | 3 | Him9 |
| 6 September at 10:38 | 390 MW | 4 | Him9 |
| 6 September at 10:28 | 318 MW | 3 | Him9 |
| 6 September at 08:22 | 60 MW | 3 | Aqua |
| 6 September at 06:40 | 144 MW | 8 | N20 |
| 6 September at 06:21 | 221 MW | 14 | N |
| 6 September at 05:45 | 683 MW | 24 | N21 |
| 6 September at 05:00 | 146 MW | 19 | N20 |
| 6 September at 00:08 | 6 MW | 1 | Terra |
Follow live
The map shows active fires in 3D, with smoke plumes, forecast wind, drop zones and the live position of water bombers tracked by ADS-B, anywhere in the world.
Open the fire mapGet the alert instead of looking for it
GISFire Pro watches the zones you draw, anywhere in the world, and warns you by email, SMS or webhook from the first satellite detection: fire in the zone, fire closing in, smoke announced before it arrives, lightning nearby. A GeoJSON and CSV API, exports and history come with it.
From €8.25 a month, 14-day trial, no commitment. The public map stays free.
Discover GISFire Pro© 2026 SARO · Gistin. All rights reserved. The interface, its presentation and the contents of GISFire are protected; reproducing or imitating them requires written permission. The source data remain the property of their respective producers, see the credits.